A straightening process of rotating bending for small and medium-sized shaft and pipe parts
The 19th International Conference on Metal Forming 2022
Meng Qingdang Yanshan University
S4 /S4-2
2022年09月13日 21:00~21:15
私有 口头报告
Spinning deformation mechanism of aluminum alloy cylinder with stiffeners
The 19th International Conference on Metal Forming 2022
Meng Yehui Shanghai Jiao Tong Uni.
S4 /S4-3
2022年09月14日 14:00~14:15
私有 口头报告
Research on Cross Wedge Rolling Forming Technology of Railway Axles
The 19th International Conference on Metal Forming 2022
XU JunSheng TAI YUAN HEAVY INDUSTRY TRANSIT EQUIPMENT CO., LTD.
S4 /S4-3
2022年09月14日 14:30~14:45
私有 口头报告
Central defects evolution of Ti-6-Al-4V alloy with large area reduction during flat Cross Wedge Rolling
The 19th International Conference on Metal Forming 2022
SHI Mingjie USTC-University of Science and Technology of China,IMR CAS-Institute of Metal Research, Chinese Academy of Sciences
S4 /S4-1
2022年09月13日 15:15~15:30
私有 口头报告
Research on densification mechanism of Inconel 718 alloy miniature gear by electric field-assisted sintering
The 19th International Conference on Metal Forming 2022
Ma Liyong Beihang University
S4 /S4-1
2022年09月13日 15:00~15:15
私有 口头报告
Smart roll forming and its application
The 19th International Conference on Metal Forming 2022
SUN YONG UESTC
S4 /S4-2
2022年09月13日 19:00~19:15
私有 口头报告
A New Dieless Forming Method for Metal Bellows Induced by Local Thermal Buckling
The 19th International Conference on Metal Forming 2022
Zhang Tianyin Shanghai Jiao Tong University
S4 /S4-2
2022年09月13日 19:45~20:00
私有 口头报告
Integrated fabrication and joining of NiAl/TiAl intermetallic by Additive Sintering
The 19th International Conference on Metal Forming 2022
Ning Hanwei Harbin Institute of Technology
S4 /S4-3
2022年09月14日 15:15~15:30
私有 口头报告
Effect of in-situ transverse magnetic field on the fluid flow, microstructure evolution and corrosion resistance of 316L stainless steel fabricated by GMAW-CMT
The 19th International Conference on Metal Forming 2022
Zhong Yang amp,State Key Laboratory of Materials Processing and Die &, Mould Technology, Department of Materials Science and Engineering, Huazhong University of Science and Technology
S4 /S4-1
2022年09月13日 16:30~16:45
私有 口头报告
